iPhone 14 tempered glass screen protector: the complete guide
The iPhone 14 takes a standard 6.1-inch tempered glass screen protector cut specifically for its flat-edge display. If you want to skip to shopping, head straight to our Tempered Glass collection and filter by iPhone 14. Below you'll find everything...
The iPhone 14 takes a standard 6.1-inch tempered glass screen protector cut specifically for its flat-edge display. If you want to skip to shopping, head straight to our Tempered Glass collection and filter by iPhone 14.
Below you'll find everything else: which protectors actually fit, why tempered glass beats plastic film, how to pick a privacy version, and a step-by-step install walkthrough that takes about five minutes.
Why tempered glass is worth it on the iPhone 14
The iPhone 14 uses Apple's Ceramic Shield front glass, which is tough for a phone glass, but it's not scratch-proof. A grain of sand in your pocket will haze it over time. Tempered glass sits on top and takes that punishment instead. When it cracks, you swap a $10 to $20 protector. Without one, you're looking at an iPhone 14 screen replacement that can run $150 to $280 depending on where you take it.
Plastic TPU film is cheaper upfront, but it scratches easily, dulls the display, and just doesn't feel as smooth under your finger. Tempered glass keeps the original feel of the screen almost intact. Hardness is rated 9H on the Mohs scale for most quality glass, which means keys and coins won't mark it.
What screen protector fits iPhone 14
The iPhone 14 has a 6.1-inch Super Retina XDR display with a flat face, a notch cutout at the top, and dimensions of 146.7 x 71.5 mm. You need a protector labeled specifically for iPhone 14. It should not be confused with the 14 Pro, 14 Plus, or 14 Pro Max, which all have different dimensions or cutouts.
Here's a quick fit reference:
| Model | Screen size | Cutout style | Protector to buy |
|---|---|---|---|
| iPhone 14 | 6.1 in | Notch | iPhone 14 specific |
| iPhone 14 Plus | 6.7 in | Notch | iPhone 14 Plus specific |
| iPhone 14 Pro | 6.1 in | Dynamic Island | iPhone 14 Pro specific |
| iPhone 14 Pro Max | 6.7 in | Dynamic Island | iPhone 14 Pro Max specific |
The 14 and 14 Pro share the same 6.1-inch panel size, but the cutout at the top is completely different. The 14 Pro switched to the Dynamic Island pill cutout. A protector made for the 14 will leave a visible gap around the Dynamic Island on a 14 Pro, and vice versa. Don't mix them up.
Does an iPhone 15 screen protector fit the iPhone 14?
No. The iPhone 15 has a slightly different front profile, and critically, it uses a Dynamic Island cutout rather than a notch. A screen protector made for the iPhone 15 will not align correctly on an iPhone 14. You'll get a gap at the top around the wrong cutout shape. Same goes in reverse: an iPhone 14 protector on an iPhone 15 will leave the Dynamic Island area uncovered or misaligned.
People often assume that because two phones share a 6.1-inch screen size they take the same protector. Screen size is measured diagonally across the panel, but the outer glass dimensions and cutout shapes still differ between generations. Always buy a protector labeled for your exact model year.
iPhone 14 privacy screen protector: is it worth the extra cost?
A privacy screen protector for iPhone 14 has a micro-louver layer built into the glass. It narrows the viewing angle so that anyone more than about 30 degrees off center sees a black screen. You see everything normally when you're looking straight at it.
Worth it? Depends on how you use your phone. If you commute on a train, work in open offices, or handle banking and emails in public, an iPhone 14 privacy screen protector pays for itself in confidence. The trade-off is that the display looks slightly darker (usually around 40 to 50% reduction in brightness at full viewing angle) and colors can shift a little. Outdoors on a sunny day you might want to bump your brightness up a notch.
Privacy glass typically costs $5 to $10 more than a standard tempered glass option. For most people who need it, that's an easy trade.
How to install a tempered glass screen protector on iPhone 14
This takes five minutes and you do not need any special tools. Most quality tempered glass screen protectors come with a cleaning kit in the box. If yours didn't, a microfiber cloth and a bit of isopropyl alcohol on a swab will do the job.
What you need
- Your iPhone 14 tempered glass screen protector
- The included cleaning wipe or microfiber cloth
- A dust removal sticker (usually included)
- A well-lit room. Natural light is best.
Step-by-step install
- Power down the phone. It's not strictly required but it makes the screen easier to see dust on.
- Clean the screen. Use the wet wipe first, then the dry microfiber. Wipe in one direction rather than circles to avoid spreading oils.
- Remove dust. Hold the phone under a light source at an angle. You'll see any dust particles. Hit them with the dust removal sticker by dabbing, not wiping.
- Peel the back liner off the protector. Handle it by the edges only. Don't touch the adhesive side.
- Align the cutout. Line up the notch cutout at the top with the notch on your iPhone 14 before you set the glass down. Once aligned, lower it from one end and let it fall into place. The adhesive is pressure-sensitive and self-setting.
- Press out any bubbles. Use a card or your finger and push from the center outward. Small bubbles near the edges usually disappear on their own within 24 hours.
- Peel the top liner. Some protectors have a second film on top. Remove it and you're done.
If you get a large bubble that won't go away, there's probably a dust particle under there. Slowly peel the protector back from one corner, use the dust sticker on the spot, and re-apply. It sticks and unsticks cleanly a few times before the adhesive starts to weaken.
Standard vs. full-coverage vs. privacy: picking the right type
Standard tempered glass covers the flat viewing area and stops just inside the curved edge of the iPhone 14's glass. It's the easiest to apply without lifting edges. Full-coverage versions extend to the very edges and sometimes use a soft polymer border to wrap the curve. These look great but are harder to apply without edge bubbles.
For most people, standard coverage is the right call. Edge-to-edge coverage sounds better on paper but the few millimeters of screen at the very edge are rarely where you're tapping anyway. Reliability of the bond matters more than that last sliver of coverage.
The iphone 14 glass screen protector category also includes some versions with auto-alignment trays in the box. Those are genuinely useful if you've struggled with placement before. They hold the protector perfectly positioned above the phone and you just press it down. Worth looking for if you're doing your first install.
Buying in bulk for a repair shop
If you're running a shop, you're probably already buying tempered glass in packs rather than singles. Our collections include multi-packs that make sense for volume. Check out the iPhone 8 Back Tempered Glass Screen Protector with Cleaning Kit (Pack of 25) as an example of the pack format we carry, or the iPhone 6/6s/7/8 Tempered Glass Screen Protector with Cleaning Kit (Pack of 10) for older model stock. The cleaning kits included in the packs mean your techs have everything they need per install without hunting for supplies.
Wholesale pricing is available. If you're ordering regularly, reach out through the site to discuss volume rates.
Replacing more than just the screen protector?
If you cracked the actual display or you've got a battery that's not holding a charge, a tempered glass protector won't fix that. Browse the full Apple iPhone 14 Replacement Parts collection for OEM-quality screens, batteries, charging ports, and more. And for a broader look at how to pick the right protector for any phone in your lineup, the Tempered Glass Screen Protectors: Shop Buyer's Guide breaks down every format clearly.
You can also browse repair guides for other models on our repair blog.
FAQ
What screen protector fits iPhone 14?
The iPhone 14 needs a tempered glass screen protector made specifically for the iPhone 14. It has a 6.1-inch flat display with a notch cutout at the top. The outer dimensions are 146.7 x 71.5 mm. Don't use a protector designed for the 14 Pro, 14 Plus, or any other model, since the cutouts and dimensions don't match.
What screen protector fits iPhone 14 Plus?
The iPhone 14 Plus needs a protector labeled for the iPhone 14 Plus. It has a 6.7-inch display with a notch cutout, making it physically larger than the standard 14. A protector from the standard 14 will be too small and won't cover the display properly.
What screen protector fits iPhone 14 Pro Max?
The iPhone 14 Pro Max uses a 6.7-inch display with a Dynamic Island cutout rather than a notch. You need a protector made specifically for the 14 Pro Max. It won't share a fit with the 14 Plus even though both are 6.7 inches, because the cutout shapes differ.
Does an iPhone 15 screen protector fit iPhone 14?
No. The iPhone 15 uses a Dynamic Island cutout and has slightly different front glass dimensions. A protector made for the 15 will have the wrong cutout shape and will sit misaligned on the iPhone 14's notch. Always match the protector to the exact model.
Will an iPhone 15 screen protector fit an iPhone 14?
No, it won't. Even though both phones use a 6.1-inch panel, the front glass shape and cutout design are different. The iPhone 14 has a notch; the iPhone 15 has a Dynamic Island. The protectors are not interchangeable in either direction.
Will an iPhone 15 screen protector fit an iPhone 14 Pro?
No. The iPhone 14 Pro also has a Dynamic Island, same as the iPhone 15, so the cutout shape matches in concept. But the overall front glass dimensions are different between the 14 Pro and the 15, so the protector edges won't align correctly. Buy a protector labeled for your specific model.
Does an iPhone 14 screen protector fit iPhone 15?
No. The iPhone 14 protector has a notch cutout, and the iPhone 15 needs a Dynamic Island cutout. Beyond the wrong cutout, the front glass dimensions differ enough that the fit won't be right. They are not cross-compatible.
What screen protector fits iPhone 14 Pro?
The iPhone 14 Pro needs a protector made specifically for the iPhone 14 Pro. It has a 6.1-inch display like the standard 14, but it uses the Dynamic Island cutout instead of a notch. That difference in the top cutout means the standard iPhone 14 protector won't work on it.
Will an iPhone 14 screen protector fit the iPhone 16e?
No. The iPhone 16e has different display dimensions and a different front glass design compared to the iPhone 14. Protectors are not interchangeable between these two models. The iPhone 16e needs a protector designed for that specific model.